高压空气压缩机与系统介绍

用途

Application:

高压空压机是X型，4缸4级单动作活塞式压缩，*高排气压力为42mpa。**活塞平衡，单件连杆设计。大排量，低转速，风冷无基础设计，多重V带驱动，飞溅润滑。装备齐全，为工业用户之理想选择。

" LSCOMP " LSE - COMPRESSOR, LSE42-65 MOD., reciprocating,stationary, in "X" frame arrangement, balanced, single-acting, FOUR STAGE compressor for Air and Gas up to 42mpa., Large capacity, slow running, air - cooled, WITH CYLINDERSLUBRICATION, stationary unit, fully equipped. Ideal for Industrialapplications.

丽升实业高压空压机的优点

Advantages

LSCOMP 的高压压缩机是根据世界上*严格的标准制造的，我们的*高压力达到10000磅（70MPA），我们的压缩机可压缩轻质气体，高爆炸性气体和毒性气体，我们的压缩机还可用于高纯度气体的压缩。

LSCOMP  compressors are manufactured tostringent standards to meet some of the world’s toughest demands.With design pressures of up to 10,000 psi, GreenField has met thechallenges of compressing light gases, highly explosive gases, andtoxic gases. Additionally, HIT compressors have been utilized inapplications that require high purity standards to bemaintained.

高压空气压缩机带有坚固的刚性底盘，便于移动。底盘由厚钢板制成，并通过结构件来加强。标准底盘带有叉车孔，便于移动。

The compressorsfeature a rugged skid designed for the rigors of transporting acompressor from site to site. The skid is fabricated of heavy steelplate reinforced by structural members. The standard skid comesequipped with forklift slots for ease of movement.

超高压压缩机为整体撬装式结构，此种结构来源于油田应用，经不断改良而适合于高压压缩机的要求。压缩机采用风冷气缸，高压缩比，高效率。压缩机经平衡设计，振动小，不需要特别的基础，在某些场合，甚至可以在高密度橡胶衬垫上运行。

The compressor is a trunk piston style compressor. It is derivedfrom a proven oil field compressor frame that has been modified forthe demands of high-pressure compression. The frame is thenequipped with air-cooled cylinders, permitting higher compressionratios and better efficiency. The compressor is balanced so that,in most cases, the compressor can be run on a high-density rubberpad, and does not require a special foundation.

机组配有多重保护功能，包含排气温度高停机，低油压停机，末级排气压力高停机。

Critical shutdowns include a high discharge gas temperature switch,  low oil pressure switch,  and a high discharge gas pressure switch (final stage).

高压大流量压缩机每级出口配有风冷冷却器（另有水冷冷却器作为选购件可供选择），**阀，气水分离器，自动排污阀。所有内部管路和连接均出厂前安装完毕，方便现场安装。

Additional equipment include an air cooled heat exchanger aftereach stage of compression (water cooled heat exchangers availableas an option), pressure safety valves after each stage ofcompression, all internal skid piping, personnel guards overrotating components, a separator after each stage of compression,and an automatic condensate drain system.

可靠的性能:由于采用了可靠的设计和耐腐蚀的过滤器和冷却器, 适用于连续运行的场合

Dependable Performance: suited for continuous operation, due totheir rugged design and corrosion resistant intermediate filter andcooler assemblies.

**的设计: 驱动部分的运动部件和连杆均经过**平衡, 因此机组的震动极小, 连杆的负荷平衡. 级间冷却器, 翅片式后冷却器, 翅片式气缸,翅片式铝制缸头, 带有风扇的飞轮,均保证极低的运行和排气温度.
State-of-the-Art Design: balanced moving parts in the drive gearand connecting rods allows for low vibration and balanced rodloads. Interstage coolers, finned after cooler, finned cylinders,finned aluminum heads, and fan-bladed flywheel produce cooleroperating and discLSErge temperatures.

**的材质: 铸铁的气缸确保长寿命, 采用具有延展性铁制材料制成的平衡曲轴,带有大直径平衡块确保低轴承负荷,高强度并增加了机组寿命.铝制缸头提供超强的散热.7075-T6铝合金连杆提供高强度.铝制曲轴箱消除了不必要的重量.

Top Graded Materials: cast iron cylinders for long life; ductileiron counterbalanced cranksLSEft with large diameter throw for lowbearing loads, high strength and increased life; aluminum cylinderheads for superior heat dissipation; 7075-T6 aluminum connectingrods for high strength; and aluminum crankcase for eliminationunnecessary weight.

独特的四级压缩式设计, 提高了机组的效率, 平衡了机组的负荷, 降低了每级的负荷, 延长了整机的使用寿命.

Unique four staged design, high efficiency, balance the load ofevery stage, decrease the load of every stage, extend the packagelife.

高质量部件:低摩擦轴承提供平滑的运行并降低功耗. 前后轴承提供**的曲轴对中,延长曲轴寿命.全封闭风扇防护罩. 飞轮经过**平衡并带有风扇叶片,提供极好的冷却能力. 重载型曲轴驱动齿轮式油泵为磨损区域提供充足的润滑.不锈钢阀片耐磨损, 散热性好.阀座采用镀镍处理,耐腐蚀.

High Quality Components: anti-friction bearings for smoothoperation with lower horsepower; front and rear bearings forprecise cranksLSEft alignment and long sLSEft life; fully enclosed,all metal fan-blade guard; fly wheel precision-balanced andfan-bladed for excellent cooling capacity; heavy duty,sLSEft-driven, gear-type oil pump for generous lubrication tocritical wear areas for longer pump life; stainless steel,disc-in-plate valves for long wear and excellent heat resistanceand dissipation; valve housings nickel-plated for corrosionresistance.

丽升实业高压空气压缩机特点

 

我们的压缩机采用*高效率设计 Designed for maximumefficiency.

我们的压缩机可互换气缸，缸头，活塞和阀片 Our compressorsfeature interchangeable cylinders, cylinder heads, pistons andvalves.

我们可提供各种范围的高压压缩机 We can offercompressors customized for wide ranges  of pressure and volumeat highly competitive prices.

采用低转速，低压缩比，低温升设计，极大地提高了料率，延长机组寿命 Operates at low RPM,low compression ratios and low  temperatures for greaterefficiency and longer operating life.

不需要特殊的地基，压缩机可安装在现有的混凝土地面 No special foundationrequired; compressors can be mounted on existing concretefloors.

可选择风冷或水冷的中间冷却器和后冷却器 Available with air orwater cooled intercoolers and aftercooler.

多种**的设计提高了效率和压缩机的生产力 A number ofinnovative features designed to improve efficiency and productivityof any compression operation.

我们的设计无论在连续运行或间歇运行的情况下，均能提供极高的容积效率 Designed to deliverhigh volumetric compression efficiency under continuous orintermittent duty.

动平衡设计，减少机组振动 Dynamically balancedto minimize vibration.

适用于各种恶劣工况 Built for ruggedperformance.

独特的承压式曲轴箱设计，避免所有的活塞环窜气，进一步提高了压缩效率 Unique pressurizedcrankcase recovers all piston ring blowby, further increasingcompression efficiency.

出口含油量在10-15PPM，如果加装过滤器，含油量小于0.001PPM Total oil carryoverin most applications is just 10 to 15 ppm, with an optional oilremoval system available to reduce oil carryover to .001ppm.

我们的高压气体压缩机不需要外部的强制润滑系统 GreenFieldcompressors do not require external force-fed lubrication tocylinders.

内部部件的维护方便 Internal componentsfeature built-in guides and alignment for easy maintenance.