主营产品:高压空压机高压空气压缩机全无油氮气增压机氦气回收循环装置呼吸空气填充泵超高压压缩机高压打气机防爆充气箱高压阀门检测空压机呼吸空气充气站中高压空压机呼吸空气压缩机气密性检测高压压缩机氦气回收压缩机高压氮气增压机


原装进口呼吸空气充填泵LSPE200的用途与优点

用途

LSPE200-TE-H是专为持续运行而设计的高质量呼吸空气充填泵. LSPE200-TE-H性能可靠,操作简单,维护方便,广泛应用于消防,救生,潜水呼吸,可常年提供满足国际呼吸空气标准“EN12021“的高品质呼吸空气.

THE LSPE200-TE-HCOMPACT  IS DESIGNEDFOR CONTINUOUS DUTY.  YOU WILL FIND THELSPE200-TE-H  IS A HIGHQUALITY, RELIABLE, ECONOMICAL TO USE, EASY TO MAINTANCE ,DEPENDABLE COMPRESSOR THAT IS IDEAL FOR  SCUBA &SCBA . AND GIVE YEARSOF HIGH QUALITY BREATHING AIR MEET GRADE“EN12021“.

 

优点

Advantages

W型,33级单动作活塞式压缩,较高排气压力为330Bar。精确活塞平衡,单件连杆设计。大排量,低转速,风冷无基础设计,多重V带驱动,飞溅润滑。装备齐全,为工业用户之理想选择。

" LSCOMP " LSCOMPRESSOR, LSPE200-TE-H MOD., reciprocating,stationary, in "W" frame arrangement, balanced, single-acting,THREE STAGE compressor for Air up to330 bar., Large capacity, slow running, air - cooled, WITH CYLINDERSLUBRICATION, stationary unit, fully equipped. Ideal for Industrialapplications.

 

压缩机为整体撬装式结构,此种结构来源于油田应用,经不断改良而适合于呼吸空气充填泵的要求。压缩机采用风冷气缸,高压缩比,高效率。压缩机经平衡设计,振动小,不需要特别的基础,在某些场合,甚至可以在高密度橡胶衬垫上运行。

The compressor is a trunk piston style compressor. It is derivedfrom a proven oil field compressor frame that has been modified forthe demands of high-pressure compression. The frame is thenequipped with air-cooled cylinders, permitting higher compressionratios and better efficiency. The compressor is balanced so that,in most cases, the compressor can be run on a high-density rubberpad, and does not require a special foundation.

 

机组配有多重保护功能,包含排气温度高停机,低油压停机,末级排气压力高停机。

Critical shutdowns include a high discharge gas temperature switch,  low oil pressure switch,  and a high discharge gas pressure switch (final stage).

 

压缩机每级出口配有风冷冷却器(另有水冷冷却器作为选购件可供选择),安全阀,气水分离器,自动排污阀。所有内部管路和连接均出厂前安装完毕,方便现场安装。

Additional equipment include an air cooled heat exchanger aftereach stage of compression (water cooled heat exchangers availableas an option), pressure safety valves after each stage ofcompression, all internal skid piping, personnel guards overrotating components, a separator after each stage of compression,and an automatic condensate drain system.

 

可靠的性能:由于采用了可靠的设计和耐腐蚀的过滤器和冷却器, 适用于连续运行的场合

Dependable Performance: suited for continuous operation, due totheir rugged design and corrosion resistant intermediate filter andcooler assemblies.

尖端的设计: 驱动部分的运动部件和连杆均经过精确平衡, 因此机组的震动极小, 连杆的负荷平衡. 级间冷却器, 翅片式后冷却器, 翅片式气缸,翅片式铝制缸头, 带有风扇的飞轮,均保证极低的运行和排气温度.
State-of-the-Art Design: balanced moving parts in the drive gearand connecting rods allows for low vibration and balanced rodloads. Interstage coolers, finned after cooler, finned cylinders,finned aluminum heads, and fan-bladed flywheel produce cooleroperating and discLSErge temperatures.

 

顶级的材质: 铸铁的气缸确保长寿命, 采用具有延展性铁制材料制成的平衡曲轴,带有大直径平衡块确保低轴承负荷,高强度并增加了机组寿命.铝制缸头提供超强的散热.7075-T6铝合金连杆提供高强度.铝制曲轴箱消除了不必要的重量.

Top Graded Materials: cast iron cylinders for long life; ductileiron counterbalanced cranksLSEft with large diameter throw for lowbearing loads, high strength and increased life; aluminum cylinderheads for superior heat dissipation; 7075-T6 aluminum connectingrods for high strength; and aluminum crankcase for eliminationunnecessary weight.

 

 

高质量部件:低摩擦轴承提供平滑的运行并降低功耗. 前后轴承提供精确的曲轴对中,延长曲轴寿命.全封闭风扇防护罩. 飞轮经过精确平衡%

普瑞格斯压缩机(上海)有限公司
电话:15921648788/021-57758888-812   传真:021-33881170
地址:上海松江新桥闵申路666-4号  邮编:201612
沪ICP备11012717号-3  

沪公网安备 31011702004376号