用途
Application:
X型，4缸4级单动作活塞式压缩，最高排气压力为42 mpa。精确活塞平衡，单件连杆设计。大排量，低转速，风冷无基础设计，多重V带驱动，飞溅润滑。装备齐全，为工业用户之理想选择。
" LSCOMP " LSE - COMPRESSOR, LSE42-65 MOD., reciprocating, stationary, in "X" frame arrangement, balanced, single-acting, FOUR STAGE compressor for Air and Gas up to 42 mpa., Large capacity, slow running, air - cooled, WITH CYLINDERS LUBRICATION, stationary unit, fully equipped. Ideal for Industrial applications.
优点
Advantages
LSCOMP 的压缩机是根据世界上最严格的标准制造的，我们的最高压力达到10000磅（70MPA），我们的压缩机可压缩轻质气体，高爆炸性气体和毒性气体，我们的压缩机还可用于高纯度气体的压缩。
LSCOMP compressors are manufactured to stringent standards to meet some of the world’s toughest demands. With design pressures of up to 10,000 psi, GreenField has met the challenges of compressing light gases, highly explosive gases, and toxic gases. Additionally, HIT compressors have been utilized in applications that require high purity standards to be maintained.
压缩机带有坚固的刚性底盘，便于移动。底盘由厚钢板制成，并通过结构件来加强。标准底盘带有叉车孔，便于移动。
The compressors feature a rugged skid designed for the rigors of transporting a compressor from site to site. The skid is fabricated of heavy steel plate reinforced by structural members. The standard skid comes equipped with forklift slots for ease of movement.
压缩机为整体撬装式结构，此种结构来源于油田应用，经不断改良而适合于高压压缩机的要求。压缩机采用风冷气缸，高压缩比，高效率。压缩机经平衡设计，振动小，不需要特别的基础，在某些场合，甚至可以在高密度橡胶衬垫上运行。
The compressor is a trunk piston style compressor. It is derived from a proven oil field compressor frame that has been modified for the demands of high-pressure compression. The frame is then equipped with air-cooled cylinders, permitting higher compression ratios and better efficiency. The compressor is balanced so that, in most cases, the compressor can be run on a high-density rubber pad, and does not require a special foundation.
机组配有多重保护功能，包含排气温度高停机，低油压停机，末级排气压力高停机。
Critical shutdowns include a high discharge gas temperature switch, low oil pressure switch, and a high discharge gas pressure switch (final stage).
压缩机每级出口配有风冷冷却器（另有水冷冷却器作为选购件可供选择），安全阀，气水分离器，自动排污阀。所有内部管路和连接均出厂前安装完毕，方便现场安装。
Additional equipment include an air cooled heat exchanger after each stage of compression (water cooled heat exchangers available as an option), pressure safety valves after each stage of compression, all internal skid piping, personnel guards over rotating components, a separator after each stage of compression, and an automatic condensate drain system.
可靠的性能:由于采用了可靠的设计和耐腐蚀的过滤器和冷却器, 适用于连续运行的场合
Dependable Performance: suited for continuous operation, due to their rugged design and corrosion resistant intermediate filter and cooler assemblies.
尖端的设计: 驱动部分的运动部件和连杆均经过精确平衡, 因此机组的震动极小, 连杆的负荷平衡. 级间冷却器, 翅片式后冷却器, 翅片式气缸,翅片式铝制缸头, 带有风扇的飞轮,均保证极低的运行和排气温度.
State-of-the-Art Design: balanced moving parts in the drive gear and connecting rods allows for low vibration and balanced rod loads. Interstage coolers, finned after cooler, finned cylinders, finned aluminum heads, and fan-bladed flywheel produce cooler operating and discLSErge temperatures.
顶级的材质: 铸铁的气缸确保长寿命, 采用具有延展性铁制材料制成的平衡曲轴,带有大直径平衡块确保低轴承负荷,高强度并增加了机组寿命.铝制缸头提供超强的散热.7075-T6铝合金连杆提供高强度. 铝制曲轴箱消除了不必要的重量.
Top Graded Materials: cast iron cylinders for long life; ductile iron counterbalanced cranksLSEft with large diameter throw for low bearing loads, high strength and increased life; aluminum cylinder heads for superior heat dissipation; 7075-T6 aluminum connecting rods for high strength; and aluminum crankcase for elimination unnecessary weight.
独特的四级压缩式设计, 提高了机组的效率, 平衡了机组的负荷, 降低了每级的负荷, 延长了整机的使用寿命.
Unique four staged design, high efficiency, balance the load of every stage, decrease the load of every stage, extend the package life.
高质量部件:低摩擦轴承提供平滑的运行并降低功耗. 前后轴承提供精确的曲轴对中,延长曲轴寿命. 全封闭风扇防护罩. 飞轮经过精确平衡并带有风扇叶片,提供极好的冷却能力. 重载型曲轴驱动齿轮式油泵为磨损区域提供充足的润滑.不 锈钢阀片耐磨损, 散热性好. 阀座采用镀镍处理,耐腐蚀.
High Quality Components: anti-friction bearings for smooth operation with lower horsepower; front and rear bearings for precise cranksLSEft alignment and long sLSEft life; fully enclosed, all metal fan-blade guard; fly wheel precision-balanced and fan-bladed for excellent cooling capacity; heavy duty, sLSEft-driven, gear-type oil pump for generous lubrication to critical wear areas for longer pump life; stainless steel, disc-in-plate valves for long wear and excellent heat resistance and dissipation; valve housings nickel-plated for corrosion resistance.
特点
我们的压缩机采用最高效率设计 Designed for maximum efficiency. |
我们的压缩机可互换气缸，缸头，活塞和阀片 Our compressors feature interchangeable cylinders, cylinder heads, pistons and valves. |
我们可提供各种范围的高压压缩机 We can offer compressors customized for wide ranges of pressure and volume at highly competitive prices. |
采用低转速，低压缩比，低温升设计，极大地提高了料率，延长机组寿命 Operates at low RPM, low compression ratios and low temperatures for greater efficiency and longer operating life. |
不需要特殊的地基，压缩机可安装在现有的混凝土地面 No special foundation required; compressors can be mounted on existing concrete floors. |
可选择风冷或水冷的中间冷却器和后冷却器 Available with air or water cooled intercoolers and aftercooler. |
多种创新的设计提高了效率和压缩机的生产力 A number of innovative features designed to improve efficiency and productivity of any compression operation. |
我们的设计无论在连续运行或间歇运行的情况下，均能提供极高的容积效率 Designed to deliver high volumetric compression efficiency under continuous or intermittent duty. |
动平衡设计，减少机组振动 Dynamically balanced to minimize vibration. |
适用于各种恶劣工况 Built for rugged performance. |
独特的承压式曲轴箱设计，避免所有的活塞环窜气，进一步提高了压缩效率 Unique pressurized crankcase recovers all piston ring blowby, further increasing compression efficiency. |
出口含油量在10-15PPM，如果加装过滤器，含油量小于0.001PPM Total oil carryover in most applications is just 10 to 15 ppm, with an optional oil removal system available to reduce oil carryover to .001 ppm. |
我们的压缩机不需要外部的强制润滑系统 GreenField compressors do not require external force-fed lubrication to cylinders. |
内部部件的维护方便 Internal components feature built-in guides and alignment for easy maintenance.
|